Mercedes A45S AMG Turbo Inlet
Import Duties and Taxes not Included outside of the United Kingdom
Overview
The Mercedes A45S AMG comes with a relatively smooth and large turbo inlet; however, it still has a few limitations.
Firstly, it is made from plastic, which is not ideal for intake temperatures. It is also prone to melting under track use as the opening for the dump valve is smaller than the dump valve outlet, causing hot gases to hit the surrounding wall of the inlet pipe. Over time, this can cause the plastic to deform, leading to potential damage to the turbo charger.
This issue was later rectified on face lift models. However, if a car is regularly used on track, replacing the standard turbo inlet is essential.
Infinity Design Turbo Inlet
The Infinity Design A45S Turbo Inlet is manufactured from 100% pre-preg carbon fibre, which helps it maintain lower intake temperatures, and features a smooth internal finish to optimise airflow.
The turbo inlet increases in size from the intake to the turbo, allowing a greater volume of air to flow through to the turbo. This is beneficial for highly tuned cars, where larger volume is essential for performance.
It also addresses the dump valve restriction on the standard inlet, providing a larger opening for the hot gases to exit without hitting the surrounding walls. The carbon fibre construction is also capable of withstanding significantly higher temperatures than the stock plastic inlet.
Due to carbon fibre being harder than plastic, it reflects more sound, resulting in a louder induction and blow-off noise.
The turbo inlet comes with an EPDM coupler that mates perfectly to the turbocharger, providing a smooth transition without any internal steps or restrictions, preventing flow separation and resulting in smoother airflow into the turbo.
The turbo inlet is available for both pre-facelift and facelift models and is a direct fitment, requiring no modifications.
The Turbo Inlet also pairs perfectly with the Infinity Design Intake




